3.1.11 terminal
User Exec Commands
Sets the length/number of lines displayed within the terminal window
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
terminal[length <0-512>|no(length <0-512>|width)|width <0-512> ]
Parameters
length
no
width
Example
RFSwitch>terminal length 100
RFSwitch>
RFSwitch>terminal width 200
RFSwitch>
Sets the number of lines on a screen
Negates a command or sets its defaults
Sets the width/number of characters on a screen line
User Exec Commands
3-15