Motorola RFS7000 Reference Manual page 662

20-74 Motorola RF Switch CLI Reference Guide
inactivity-timeout
<60-86400>
kdc [password (0||LINE) |
realm (LINE) | server
(primary|secondary|
timeout)] auth-port
<1-65535>
mobility (enable)
Sets an inactivity timeout in seconds. If a frame is not
received from a mobile unit for this amount of time, the
mobile unit is disassociated.
Modifies KDC related parameters.
• password(0|2|LINE) – Create a KDC server password (up
to 127 characters)
• 0 – Password is specified UNENCRYPTED.
• 2 – Password is encrypted with a password-
encryption secret.
• LINE – Defines a KDC server password (up to
127 characters)
• realm(LINE) – Defines a KDC realm (up to 127 characters)
• LINE – Defines KDC realm (up to 127
characters)
• server (primary|secondary) (IP address) auth-port <1-
65535> – Modifies KDC server parameters
• primary – Defines the primary KDC server
• secondary – Defines the secondary KDC
server
• IP address – Sets the KDC server IP address
• auth-port<1-65535> – Sets the KDC server
authentication port. Default is 88
• server(timeout)<1-60> – Modifies KDC server parameters
• timeout – Defiens the time the switch waits for a
response from the KDC Server before retrying
Enables L3 Mobility on WLAN(s)