sensor
unapproved-aps
wireless-switch-
statistics
wlan
config
<1-32>
Example
RFSwitch>show wireless ap
Number of access-ports adopted
Available licenses
Clustering enabled
Clustering mode
RFSwitch>
RFSwitch>show wireless ap-detection-config
Rogue
AP timeout
Approved AP timeout
mu-assisted scan
mu-assisted scan refresh : 300 seconds
configured approved-aps
Index | Bss Mac
-------------------------------------------------------
Adaptive minimum adoption version: 2.0.0.0-000R
Defines Wireless Intrusion Protection System (WIPS)
parameters
• <1-48> – Specifies the index of a particular sensor to
view detailed information about that sensor
• default-config – Default configuration parameters for
sensors
Defines unapproved APs seen by an access port or a mobile
unit scan
Wireless-switch statistics
• detail – Displays detailed wireless-switch statistics
Displays wireless LAN parameters
WLAN configuration
A WLAN index <1-32>
• all – All WLAN in configuration
• enabled – Only currently enabled WLANs
• statistics – WLAN statistics
• <1-32> – Defines a WLAN's index <1-32>
: 0
: 0
: N
: primary
: 300 seconds
: 300 seconds
: enabled
:
| Ssid
Common Commands
2-83