20-40
Motorola RF Switch CLI Reference Guide
20.1.27 multicast-throttle-watermark
Wireless Configuration Commands
Configures watermarks for supporting bursts of broadcast/multicast frames
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
multicast-throttle-watermarks (low)<0-100> (high) <0-100>
Parameters
low <0-100>
high <0-100>
Example
RFSwitch(config-wireless)#multicast-throttle-watermarks low 10 high
20
RFSwitch(config-wireless)#
Sets the low water-mark. If the percentage of free packets
in the system is lower than this threshold, the incoming
frame is dropped.
Sets the high water-mark. If the percentage of free packets
in the system is between the low water-mark and this
value, the packet is subjected to a random-early-drop. If
free packets are greater than this value, the packet is
processed.