4-16
Motorola RF Switch CLI Reference Guide
4.1.9 copy
Priv Exec Command
Copiesw any file (config,log,txt ...etc) from any location to the switch and vice-versa
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
copy (FILE|URL) (FILE|URL)
Parameters
FILE
URL
Example
Transferring file snmpd.log to remote tftp server?
RFSwitch#copy flash:/log/snmpd.log
tftp://157.235.208.105:/snmpd.log
Accessing running-config file from remote tftp server into switchrunning-config?
RFSwitch#copy tftp://157.235.208.105:/running-
config running-config
NOTE: Copying a new config file onto an existing running-config file
merges it with the existing running-config on the switch. Both, the
existing running-config and the new config file are applied as the
current running-config.
Copying a new config file onto a start-up config files replaces the
existing start-up config file with the parameters of the new file. It is
better to erase the existing start-up config file and then copy the new
config file to the startup config.
Defines the target file from which to copy
Defines the URL from which to copy