Motorola RFS7000 Reference Manual page 417

Rfs series wireless lan switches

Hide thumbs Also See for RFS7000:

Table of Contents

Usage Guidelines

Interfaces ge1-ge4 can be configured as trunk or in access mode. An interface (when

configured as trunk) allows packets (from the given list of VLANs) to be added to the trunk.

An interface configured as "access" allows packets only from native VLANs

[no] switchport (access|mode|trunk)

RFSwitch(config-if)#switchport mode access

RFSwitch(config-if)#

Sets the trunking mode characteristics

• allowed – Configures trunk characteristics when the port

is in trunk-mode

• vlan – Sets allowed VLANs

• add – Adds VLANs to the current list

• none – Allows no VLANs to Xmit/Rx

through the Layer2 interface

• remove – Removes VLANs from the

current list

• VLAN_ID – VLAN_IDs added or removed.

Can be either a range of VLANs (55-60) or a

list of comma separated VLAN IDs

(35, 41 etc.)

• native – Configures the native VLAN ID of the trunk-

• tagged – Tags the native VLAN

• vlan <1-4094> – Sets the native VLAN for

classifying untagged traffic when the

interface is in trunking mode

Interface Instance

to undo switchport configurations

Rfs6000 Ws5100