Motorola RFS7000 Reference Manual page 452

14-20 Motorola RF Switch CLI Reference Guide
permit {icmp}
{source/source-mask |
host source | any}
{destination/ destination-
mask | host destination |
any}
[icmp-type |
[icmp-type icmp-code]]
[log]
[rule-precedence access-
list-entry precedence]
permit
Use with the
• permit – Allows ICMP packets on an ACL
• {icmp} – Specifies ICMP as the protocol
• {source/source-mask | host source | any} – The
keyword source is the source IP address of the
network or host (in dotted decimal format). The
source-mask is the network mask. For example,
10.1.1.10/24 indicates the first 24 bits of the source
IP are used for matching.
• any is an abbreviation for source IP of 0.0.0.0
and source-mask bits equal to 0
• host is an abbreviation for exact source (A.B.C.D)
and source-mask bits equal to 32
• {destination/ destination-mask | host destination |
any} – Defines the destination host IP address or
destination network address
• [icmp-type |icmp-type icmp-code] – Sets the ICMP
type value from 0 to 255 (valid only for ICMP). Set an
ICMP code value from 0 to 255 (valid only for ICMP).
• [log] – Generates log messages when the packet
coming from the interface matches the ACL entry. Log
messages are generated only for router ACLs.
• [rule-precedence access-list-entry precedence] – Set
an integer value between 1-5000. This value sets the
rule precedence in the ACL.
command to allow ICMP packets