Network; Next-Server - Motorola WS5100 Series Cli Reference Manual

17-16 WS5100 Series Switch CLI Reference Guide

17.1.19 network

DHCP Config Commands
Sets the network pool's IP address. This address maps the current DHCP pool with a
specific network
Syntax
network [A.B.C.D|A.B.C.D/M]
Parameters
network [A.B.C.D|A.B.C.D/M]
Usage Guidelines
Ensure a VLAN interface (with specific network/subnet) exists on the switch before
mapping a DHCP pool to a particular network
Example
WS5100(config-dhcp)#network
WS5100(config-dhcp)#

17.1.20 next-server

DHCP Config Commands
Sets the IP address of the next server in the boot process
Syntax
next-server <IP address>
Parameters
next-server <IP address>
Sets the network number and mask
• A.B.C.D – Network number in dotted
decimal format.
• A.B.C.D/M – Network number and mask.
2.2.2.0/24
Sets the next server in boot process
• <IP address> – Defines the server's IP
address