20.1.30 qos-mapping
Wireless Configuration Commands
Configures QoS mappings between the wired and wireless domains be negated using this
command
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
qos-mapping(wired-to-wireless|wireless-to-wired)
qos-mapping wired-to-wireless(dot1p<0-7>|dscp<0-63>)
(background|best-effort|video|voice)
qos-mapping wireless-to-wired(background|best-effort|video|voice)
dot1p<0-7>
Parameters
wired-to-wireless
dot1p<0-7>
dscp<0-63>
background
best-effort
video
voice
wireless-to-wired
dot1p<0-7>
Mappings used while switching wired traffic over the air
Configures the mapping of 802.1p tags to access
categories. You can specify more than one 802.1p tag (0-7).
Configures the mapping of DSCP values to access
categories. You can specify more than one DSCP value
(0-63).
Prioritizes Background category traffic
Prioritizes Best Effort category traffic
Prioritizes Video category traffic
Prioritizes Voice category traffic
Sets the mappings used while switching wireless traffic to
the RON side
Configures the 802.1p tags that correspond to a selected
access category
Wireless Instance
20-43