Bridge - Motorola RFS7000 Reference Manual

5.1.7 bridge

Global Configuration Commands
Configures bridge specific commands
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
[no] bridge [<1-32>|multiple-spanning-tree]
bridge <1-32> [MAC address|ageing-time]
bridge <1-32> <MAC address> [discard|forward]<interfaces>
bridge <1-32> (ageing-time) [0|<10-1000000>]
bridge(multiple-spanning-tree)(enable)
SWITCH NOTE: The interfaces mentioned below are
supported in the following platforms:
• eth <1-2> – Only supported on WS5100
• ge <index> – RFS7000 supports 4 GEs and RFS6000 supports 8 GEs
• sa <1-4> – Only supported on RFS7000
• me1 – Only supported on RFS7000 and RFS6000
• up1 – Only supported on RFS7000 and RFS6000
Global Configuration Commands 5-17