Command Output; Transposing Mistyped Characters; Controlling Capitalization - Motorola RFS7000 Reference Manual

Rfs series wireless lan switches

Hide thumbs Also See for RFS7000:

Table of Contents

1.4.5 Command Output pagination

Output often extends beyond the visible screen length. For cases where output continues

beyond the screen, the output is paused and a

prompt displays at the bottom of the screen. To resume the output, press the Return

key to scroll down one line or press the Spacebar to display the next full screen of output.

If you have mistyped a command entry, you can transpose the mistyped characters. To

transpose characters, use the following key combination:

Capitalize or lowercase words with a few simple key sequences. The switch CLI

commands are generally case-insensitive (and in lowercase). To change the capitalization

of the commands, use one of the following sequences:

Transposes the character to the left of the cursor with the character

located at the cursor

Capitalizes the letters to the right of cursor

Changes the letters at the right of cursor to lowercase

Press Any Key to Continue (Q to

Introduction 1-

Rfs6000 Ws5100