Motorola RFS7000 Reference Manual page 682

21-12 Motorola RF Switch CLI Reference Guide
21.1.8 no
SOLE Config Commands
Defines the name of the adapter or disables the adapter(s)
Supported in the Following Platforms:
• WS5100
• RFS7000
• RFS6000
Syntax
no [adapter|locate|near-me|site]
no adapter (aeroscout) (enable)
Parameters
adapter (aeroscout)
(enable)
locate
near-me
site
Usage Guidelines
Use
[no] adapter [aeroscout(enable)|enable]
adapters. The SOLE adapter is
SWITCH NOTE: The following commands are supported only
on RFS6000.
• locate
• near-me
• site
Negates SOLE adapter name configuration
• aeroscout – Defines the name of the adapter
Neagates location configurations
Negates near-me tag configurations for smart surroundings
Negates site configurations
disabled
• enable – Use with no to disable all the SOLE
adapters
to disable specified or all SOLE
by default