Motorola RFS7000 Reference Manual page 666

20-78 Motorola RF Switch CLI Reference Guide
secure-beacon
set-vlan-user-limit
[<1-4094>|VLAN]
[<0-4096>]
• ip-address – Sets the RADIUS server's IP
address
• auth-port<1024-65535> – Establishes the
RADIUS server's authentication port
(default:1812)
• radius-key – Sets the RADIUS server shared
secret, up to 127 characters
• 0 – Password is specified UNENCRYPTED
• 2 – Password is encrypted with password-
encryption secret
• LINE – Defines RADIUS server shared secret,
upto 127 characters
• server timeout<1-300> retransmit<1-100> – Modify
RADIUS/802.1X server parameters
• timeout<1-300> – Time (in seconds), the
switch waits for a response from the RADIUS
server before retrying
• retransmit<1-100> – Number of retries before
the switch gives up and disassociates the
mobile unit
NOTE: The
RFSwitch(config-wireless)# radius
server timeout<*> retransmit<*>
than what is defined for an MU's timeout and retries. If
the MU's time is less than the server's, a fallback to the
secondary server will not work
Does not include the SSID of this WLAN in beacon frames
Sets user limits on VLANs for this WLAN
• [<1-4094>|VLAN] – VLAN range list. It can be either a
single index, a list (1,3,7) or a range (3-7) of indices
• [<0-4096>] – Sets the VLAN index. The limit
is <0-4096>
should be less