Lease - Motorola RFS7000 Series Reference Manual

12.1.15 lease

DHCP Config Commands
Use this command to configure a valid lease time for the IP address used by all DHCP clients in the network
pool.
Syntax
lease [{<0-365> <0-23> <0-59>}|infinite]
Parameters

lease [

{<0-365> <0-23> <0-59>}
|infinite]
Usage Guidelines
If lease parameter is not configured on the DHCP network pool, the default value is used. The default value of
the lease is 24 hours.
The lease vlaue for DHCP host pool is infinite.
Example
RFS7000(config-dhcp)#lease 20 12 30
RFS7000(config-dhcp)#
Sets the lease time for IP address.
• <0-365> – Lease period in days. Days can be made as 0 only when hours
and/or mins are greater than 0.
• <0-23> – Used with the above to set the hours for the lease period.
• <0-59> – Used with the above to set the minutes for the lease period.
• infinite – Sets the lease period as infinite.
12-17