Lease - Motorola RFS Series Reference Manual

18-22 Motorola RF Switch CLI Reference Guide

18.1.16 lease


DHCP Config Commands
Sets a valid lease time for the IP address used by DHCP clients in the network pool
Supported in the following platforms:
• RFS7000
• RFS6000
• RFS4000
Syntax
lease [{<0-365> <0-23> <0-59>}|infinite]
Parameters
lease [
{<0-365> <0-23> <0-59>}
|infinite]
Usage Guidelines
If lease parameter is not configured on the DHCP network pool, the default value is used.
The default value of the lease is 24 hours.
The lease value for DHCP host pool is infinite. Hence the lease configuration is not
applicable for DHCP host pool
Sets the lease time for an IP address
• <0-365> –Sets the lease period in days. Days
can be made as 0 only when hours and/or mins
are greater than 0
• <0-23> – Sets the hours for the lease period.
Hours can be 0 only when days and/or
minutes are configured with a value greater
than 0
• <0-59> – Sets the minutes for the lease
period. Minutes can be 0 only when days
and/or hours are configured with a value
greater than 0
• infinite – Sets the lease period as infinite