17-10
WS5100 Series Switch CLI Reference Guide
17.1.9 dns-server
DHCP Config Commands
Sets the DNS server's IP address that's available to all DHCP clients connected to the pool.
Use the
no dns-server
Syntax
dns-server <ip address1> <ip address2> <ip address3> .....<ip
address8>
Parameters
dns-server <IP address>
Usage Guidelines
For DHCP clients, the DNS server's IP address maps the host name to an IP address. DHCP
clients use the DNS server's IP address based on the order (sequence) it is configured
Example
WS5100(config-dhcp)#dns-server 2.2.2.222
WS5100(config-dhcp)#
17.1.10 domain-name
DHCP Config Commands
Sets the domain name for the network pool. Use the
remove the domain name
Syntax
domain-name (name)
Parameters
domain-name (name)
Usage Guidelines
The domain name cannot be more than 256 characters
Example
WS5100(config-dhcp)#domain-name Engineering
WS5100(config-dhcp)#
command to remove the DNS server list
Configures the DNS server's IP address.
• <IP address> – Sets the server's IP address.
Defines the domain name for the network pool
command to
no domain-name