Command Line Interface Login Procedure For The Wireless Switch - Motorola RFS7000GR Installation Manual

36 Motorola Solutions RFS7000GR Series RF Switch Secure Installation Guide

6.3 Command Line Interface Login Procedure for the Wireless Switch

The following steps explains the CLI login procedure:
1. Please press "Enter" to activate this console.
login as: admin
RFS7000 release 5.4.10.0-003GD
This Device Is Running In FIPS Mode
Attention:
This is a protected and private wireless system. No un-authorized
access is allowed.
You must have proper rights to access and manage this system from
authorized personnel.
admin@192.168.13.4's password:
2. Once Username and Password credentials are validated, the switch will prompt to change the
default password to a new value. This prompt is only provided when logging to the switch for the
first time. Please change the default password of the admin user.
NOTE
3. Once Username and Password credentials are validated, the below prompt will be returned. Enter
" " to get into execution mode.
Enable
[G]rfs7000-37FABE>enable
[G]rfs7000-37FABE#
All the commands in the FIPS build are appended with [G]