Table of Contents
Advertisement
Adjustment/Diagnostic Software
2. LO Frequency
2. LO Frequency
Assembly Adjusted
A14 frequency control assembly
Related Performance Tests
Frequency Readout Accuracy and Frequency Count Marker Accuracy
Procedure
Figure 2-1
LO Frequency Adjustment Setup
1. Connect the equipment as shown in
2. Observe the upper right-hand corner of the spectrum analyzer
3. Whenever this adjustment is performed, the YTO FM Coil (3)
64
carefully follow the instructions issued by the software program. See
Figure 2-2 on page 65
display while making adjustments. Prompts will appear to let you
know when the LO frequency is correctly adjusted.
automated adjustment must also be performed.
Figure 2-1 on page 64
for adjustment locations.
and
Chapter 2
Advertisement
Chapters
Table of Contents
Troubleshooting
