General Safety Considerations - Agilent Technologies 8564EC Service Manual

Notice
Agilent Technologies makes no warranty of any kind with regard to this
material, including but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Agilent Technologies shall not be liable for errors contained herein or
for incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
All Rights Reserved. Reproduction, adaptation, or translation without
prior written permission is prohibited, except as allowed under the
copyright laws.
The information contained in this document is subject to change
without notice.
Certification
Agilent Technologies certifies that this product met its published
specifications at the time of shipment from the factory.
Agilent Technologies further certifies that its calibration measurements
are traceable to the United States National Institute of Standards and
Technology, to the extent allowed by the Institute's calibration facility,
and to the calibration facilities of other International Standards
Organization members.

General Safety Considerations

The following safety notes are used throughout this manual.
Familiarize yourself with these notes before operating this instrument.
Warning denotes a hazard. It calls attention to a procedure
WARNING
which, if not correctly performed or adhered to, could result in
injury or loss of life. Do not proceed beyond a warning note
until the indicated conditions are fully understood and met.
Always use the three-prong AC power cord supplied with this product.
CAUTION
Failure to ensure adequate grounding may cause product damage.
2