Figure 4-28
Main Deck Screws
Replacement
1. If the rear dress panel is removed, secure it to the rear frame using
2. Place the spectrum analyzer on its front panel allowing easy access
3. Place the rear frame on the spectrum analyzer and secure the
4. Place the coax cable's BNC connectors into the appropriate
Chapter 4
two nuts. Ensure that the dress panel is aligned with the frame.
to the rear-frame area.
knurled nut on the earphone jack. A lock washer should be used on
the inside of the rear frame and a flat washer on the outside.
rear-frame holes as described below. Use a 9/16-inch nut driver to
attach the dress nuts holding the BNC connectors to the rear frame.
Rear
EC-series
J1
n/a
J4
J5
J6
J7
J8
J9
J11
Procedure 11 . Rear Frame/Rear Dress Panel
Panel Jack
RF Cable
W64
W55
W24, coax 5
W23, coax 93
W25, coax 4
W55
W18, coax 97
W31, coax 8
W58, coax 8
Assembly Replacement
241