Replacing the Fuse
Use the following fuse:
Agilent Part Number : 2110-0917
(UL/CSA type, semi time delay 6.3A 250V)
If you need this fuse, contact your nearest Agilent Technologies Sales and Service Oce.
Note
The same fuse can be used for both line voltage settings. You do not have to
change the fuse when changing the line voltage.
Perform the following steps to exchange the fuse:
Remove the power cord if it is connected. Open the cover of AC line receptacle on
To check or replace the fuse, pull the fuse
holder out of the power selector and
remove the fuse from the fuse holder.
B-6
Maintenance
the rear panel using a small,
at-blade
screwdriver.
To reinstall the fuse, insert a fuse into the
fuse holder.