Setting The Drying Feed; Setting A Language; Setting Time; Setting Unit (Temperature/ Length) - MIMAKI TS300P-1800 Operation Manual

Chapter 3 Mchine setting

Setting the Drying Feed

After printing, set the media feed length for drying
uniformly to the end of the media.
• According to the position of your optional heater
unit 1800 or external heater, please configure that
the rear end of printing can pass through the
heater.
Press
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
Press
3
and press the
Press the
4
• "DRYING FEED" will be selected.
Press
5
media, and press the
Press
6
FEED", and press the
Press
7
press the
Press the
8
end the setting.

Setting a LANGUAGE

You can change the displayed language.
Press
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
Press
3
and press the
Press
4
press the
Press the
5
end the setting.
3-18
(MENU) (twice)
(>>) .
to select "DRYING FEED",
key.
key.
to input the feed length of
key.
to select "BACKWARD
key.
to select "ON/OFF", and
key.
key several times to
(MENU) (twice)
(>>) .
to select "LANGUAGE",
key .
to select language, and
key .
key several times to

Setting Time

You can set time of your country (time difference).
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "TIME", and
3
press the
Press
4
and press the
• Year/Month/Day/Time selecting:
by the [][]
• Year/Month/Day/Time inputting:
by the [][]
Press the
5
end the setting.
• -20 hours to +4 hours can be set.

Setting Unit (Temperature/ Length)

Units used by this machine are set.
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "UNIT/TEMP." or
3
"UNIT/LENGTH", and press the
key.
Press to select a set value, and
4
press the
• Set value of tempture : °C / °F
• Set value of length
Press the
5
end the setting.
(twice)
key.
to enter time,
key.
key several times to
(twice)
key.
: mm / inch
key several times to