Specifications; Machine Specifications - MIMAKI TS300P-1800 Operation Manual

Chapter6 Appendix

Specifications

Machine specifications

Item
Method
Print head
Specification
Printing mode (scan x feed)
Usable inks
Ink supply
4-colors
6-colors
Capacity of ink
pack
7-colors
8-colors
Usable media
Max. printing width
Maximum
Minimum
Thickness
Roll outside
diameter
Roll Media size
Roll weight
Roll inside diameter
Printing surface
Roll end treatment
Maximum
Leaf media size
Minimum
Leaf media
Margin
Roll media
Absolute accuracy
Distance accu-
racy
Reproducibility
Perpendicularity
Media skew
Head height adjustment
Cutting of media
Media delivery
Waste ink tank
Print data transmis-
sion function
Interface
Mail function
Command
during standby
during continuous
Noise printing
during discontinu-
ous printing
Safety Standard
6-2
Drop-on-demand piezoelectric print heads
4-Head Inline
360×360dpi/ 540×360dpi/ 720×720dpi/ 720×1080dpi/ 720×1440dpi
9 colors (Y,M,Bl,K,LBl,Lm,Lk,FP,FY)
Supplying from ink packs through tubes.
Ink pack replacement type :
Supplying by Toggle switch over with 2 packs/color (4-colors ink set)
Y, M, Bl, K : 2L ink pack 2L-ink pack x 2 for each color
Y, K, LBl, Lm : 2L-ink pack x 1 for each color M,Bl : 2L-ink pack x 2 for each color
Y, K, FP, FY : 2L-ink pack x 1 for each color M, Bl : 2L-ink pack x 2 for each color
Y,K, Bl, LBl, Lm, Lk : 2L-ink pack x 1 for each color M : 2L-ink pack x 2
Y, M, Bl, K LBl, Lm, FP, FY : 2L ink pack 2L-ink pack x 1
Duplex paper
1940mm
1940mm
210mm
1.0mm or less
Paper media : Φ250mm or less
*1
Other media : Φ210mm or less
*1, *2
40kg or less
2 or 3 inches
Side facing outward
The roll end is gently fixed to the core with weak-adhesive tape or weak glue for
easy removal.
1950mm
210mm
Left end and right end : 15 mm (Default) Front :120 mm Rear : 150 mm
Left end and right end : 15 mm (Default) Front :120 mm Rear : 150 mm
Whichever the larger one of ± 0.3 mm or ± 0.3 % of the designated
Whichever the larger one of ± 0.2 mm or ± 0.1 % of the designated
± 0.5 mm / 1000 mm
5 mm or less / 10 m
2 mm to 7 mm, can be freely adjusted manually
Cutting of Y direction by the head cutter. Cutting accuracy (steps) : 0.5 mm or less.
Take-up device supplied as a standard accessory
(switching possible between face in and face out).
Bottle type ( 2,000 cc)
USB 2.0, Ethernet 1000BASE-T
Ethernet 10 BASE-T / 100 BASE-TX / 1000BASE-T
MRL- V
Less than 58 dB (A) (FAST-A, Front & Rear & Left & Right 1 m)
Less than 65 dB (A)
*3
Less than 70 dB (A)
VCCI-Class A, FCC-Class A, UL 60950, CE Marking (EMC,Low Voltage Direc-
tive,Machinery Directive, RoHS Directive), CB Report, RoHS
TS300P-1800