Setting The Drying Feed; Setting A Language; Setting Time - MIMAKI Tx300P-1800B Operation Manual

Press the
5
end the setting.
• To improve image quality for printing, we
recommend selecting "ON" in step 4.

Setting the Drying Feed

After printing, set the media feed length for drying
uniformly to the end of the media.
• According to the position of your external heater,
please configure that the rear end of printing can
pass through the heater.
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "DRYING FEED",
3
and press the
Press the
4
• "DRYING FEED" will be selected.
Press to input the feed length of
5
media, and press the
Press the
6
end the setting.
key several times to
(twice)
key.
key.
key.
key several times to
Chapter 3 Machine setting

Setting a LANGUAGE

You can change the displayed language.
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "LANGUAGE",
3
and press the
Press to select language, and
4
press the
Press the
5
end the setting.

Setting Time

You can set time of your country (time difference).
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "TIME", and
3
press the
Press
4
and press the
• Year/Month/Day/Time selecting:
by the [][]
• Year/Month/Day/Time inputting:
by the [][]
Press the
5
end the setting.
• -20 hours to +4 hours can be set.
(twice)
key .
key .
key several times to
(twice)
key.
to enter time,
key.
key several times to
3-17
1
2
3
4
5
6