Setting Of Logical Seek; Setting Of Overprint; Setting Of Drying Time - MIMAKI SWJ-320EA Operation Manual

Setting of Logical Seek

The head's operation varies depending on the Logical
Seek settings, as shown in the figure below.
Movement of heads when Logical Seek is "Media".
UNI-DIRECTIONAL
Media
Print area
Red arrow : Movement of head
Movement of heads when Logical Seek is "Data".
UNI-DIRECTIONAL
Media
Print area
Red arrow : Movement of head
Movement of heads when Logical Seek is "Quality".
UNI-DIRECTIONAL
Media
Print area
Red arrow : Movement of head
BI-DIRECTIONAL
The head moves twice the distance of longer side of the set
media from the center of the platen as a reference.
Center
Media
Print area
Red arrow : Movement of head
If the Logical Seek is set to "Data" or "Media", the
following phenomena may occur. In such a case, set
the Logical Seek to "Quality".
• The accuracy of the media feed amount is
lowered.
• Media skews.
• Lateral stripes occur due to feed variations.
Press the
1
Local.
Press
2
and press the
BI-DIRECTIONAL
Media
BI-DIRECTIONAL
Media
(MENU) key in
to select SETUP 1 to 4,
key.
• Setup menu appears.
Press to select "Logical Seek",
3
and press the
Press
4
press the
• Set value : Data/ Media/ Quality
Press the
5
to end the setting.

Setting of Overprint

Sets the number of layers in which ink is to be applied.
Press the
1
Local.
Press to select SETUP 1 to 4, and
2
press the
• Setup menu appears.
Press the
3
Press to select "Overprint" , and
4
press the
Press to set number of Overprint,
5
and press the
• Setting value : Host/ 0 to 9 times
Press the
6
end the setting.

Setting of Drying Time

In the drying time setting, the following items for ink drying
time are set.
• SCAN : Ink drying time for each scanning is set. (During
bidirectional printing, the machine stops for a
certain period of time specified for each of the
outward and return scanning.)
• When you give priority to the setting at the
RasterLink side, make the setting value "Host".
• "SCAN" set in this machine is displayed as "Pause
Time per Scan" in the RasterLink.
Press the
1
LOCAL.
Press
2
and press the
• SETUP MENU will be displayed.
Press
3
and press the
Chapter 3 Setup
key.
to select a set value, and
key.
key several times
key in
(MENU)
key.
(>>) .
key.
key.
key several times to
key in
(MENU)
to select SETUP 1 to 4,
key.
to select "DRYING TIME",
key.
3
2
2
3-7