Menu Mode - MIMAKI TS300P-1800 Operation Manual

Menu mode

This machine has 4 modes. Each menu mode is described below.
NOT-READY mode
This is the mode in which the media has not been detected yet.
LOCAL mode
Local mode is the mode for the drawing preparation state.
All the keys are effective.
The machine can receive data from the computer.However, it does not perform printing.
Screen display in Local mode
Displays the current heater
temperature.
The color of the icon above the
temperature display changes
with the current heater status.
Orange : Temperature rising
Green : Set temperature
reached
Glay : Heater off
Displays the functions that
have been set for the function
keys [FUNC1] – [FUNC3].
This mode permits the following operations:
• Pressing the JOG keys to set up a drawing origin and drawing area.
• Pressing the [ENTER] key to check the remaining amount of ink, the description of the cartridge error, the
model name, the firmware version, and so on.

MENU mode

To set MENU mode, press the [FUNC1] key when this machine is in LOCAL mode.
In this mode, each function can be set.
REMOTE mode
This machine prints the data it receives.
Local <Setup 1>
heigth: 4.0mm
width:1340mm
POST1 POST2
30° /40°30° /50° HIGH
TEST PRINT
MENU
CLEANING
[SEL] key
Function key [FUNC1] ~ [FUNC3]
Press the [SEL] key to change the functions.
Display the current setting number.
Displays the time.
12:00
Displays the current head
height and the detected media
width.
FAN
Displays detected ink levels
(approximate)
REMOTE
Chapter 1 Before Use
1-15
1
2
2
2
5
6