Register The Optimal Print Conditions To Match The Use - MIMAKI TS300P-1800 Operation Manual

Chapter 3 Setup
Register the optimal print conditions
to match the use
In this machine, you will be able to register print
conditions, SETUP 1 to 4 individually to match the media
in advance.
For example, after print on different types of media, return
to the media always use. In such case you can set the
optimum printing conditions by simply selecting the
registered SETUP 1 to 4.
• Print conditions that can be pre-registered with the
machine are the four types, "SETUP 1" to "SETUP
4".
• If you print with the print condition which do not
often use, you will be able to set the print
conditions by selecting "Temporary".
If turn on the power again, settings in "Temporary"
will return to the original state when it was
purchased.
Also if turn on the power again in "Temporary"
state, it will be the state in selecting "SETUP 1".
Register the print conditions to SETUP 1 to 4
Press
1
Press
2
and press the
• The item selected indicates ● and others show
○ .
• SETUP MENU will be displayed.
Press
3
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
How to use [Temporary]
[Temporary] is not only to set the print condition to be
used only once, but also can be used for partial change of
the registered SETUP "1 to 4", or for reflecting the print
conditions set by the [Temporary] to SETUP 1 to 4.
 Register the print conditions in [Temporary]
Registration of the print conditions to [Temporary] can
be done as the same method as to SETUP 1 to 4.
Press
1
Press
2
and press the
• SETUP MENU will be displayed.
Press
3
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
3-4
in LOCAL.
(MENU)
to select SETUP 1 to 4,
key.
to select and set each item
in LOCAL.
(MENU)
to select "Temporary",
key.
to select and set each item
 Copy the contents of SETUP 1 to 4 to
[Temporary]
You can use it with changing the part of registration
contents of SETUP 1 to 4.
Select "copy" from the registration screen of [Temporary],
and specify the copy source (SETUP 1 to 4).
Press
(MENU)
1
Press to select "Temporary",
2
and press the
• SETUP MENU will be displayed.
Press ( <<).
3
Press to select "COPY", and
4
press the
• Selection screen of the copy source will be
displayed.
Press to SELECT the copy
5
source (SETUP 1 to 4) and press the
key.
• Confirmation screen of the copy will be displayed.
Press the
6
• Settings selected in step 5 is copied to Temporary.
Press to select the setting item
7
to be changed, and press the
• Please see the reference page in the setup menu
list for detailed configuration procedure.
 Reflect The Content Set In [Temporary] To
Setup 1 To 4
Press
(MENU)
1
Press to select "Temporary",
2
and press the
• SETUP MENU will be displayed.
Press to select and set each item
3
in the setup menu list.
• Please see the reference page in the setup menu
list for detailed configuration procedure.
Display the last page of Temporary and
4
select "SAVE SETTING", and press the
key.
• Selection screen of the save location will be
displayed.
Press to select the location
5
selected (SETUP 1 to 4), and press the
key.
• Save confirmation screen will be displayed.
Press the
6
in LOCAL.
key.
key.
key.
key.
in LOCAL.
key.
key.