Chapter 1 Before Use
Moving This Machine
Where to Install This Machine
Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Model
Width
TS300P-1800
3200mm
500 mm or more
Working Environmental Temperature
Use this machine in an environment of 20 to 30C to
ensure reliable printing.
1-2
Gross
Depth
Height
weight
850mm
1857mm
213kg
500 mm or more
Moving This Machine
Move this machine according to the following steps when
this machine needs to be moved on the same step-free
floor.
• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur. Be sure to request your distributor or our
service office to move this machine.
• When moving this machine, take care that it does
not receive a significant impact.
• Be sure to lock the casters after moving of this
machine.
Remove the caster blocks.
1
Raise the take-up legs.
2
Raise the adjuster foot of the roll guide
3
stay.