When cleaning the sensor on the lower surface of the
head is cleaned, move the carriage to the left end by the
operations of step 1 of P.4-12 "Cleaning the Ink Head and
the Area around It", and clean it.
The backside of the machine
Media sensor
The lower surface of the head
Media sensor
• Don't touch the cutter around the media sensor.
Sharp cutter tip may injure you.
Cleaning the Media Press
When the media press is covered with lint, dust, etc., a
media cannot be fed normally during printing or dust
sticks to the nozzles, which may result in abnormal
printing.
Clean the media press regularly.
Media press
Chapter 4 Maintenance
4-3
1
2
2
4
5
6