Replace The Waste Ink Tank With Another - MIMAKI TS300P-1800 Operation Manual

Chapter 4 Maintenance

Replace the waste ink tank with another

When the waste ink tank becomes full, carry out the
procedure below to replace the waste ink tank, and in the
Maintenance menu, set 0% for waste ink tank information.
If you replace the waste ink tank before the waste ink tank
confirmation message is displayed (before the 2L tank is
80% (1.6L) full), carry out the same procedure to replace
the waste ink tank.
Press
1
in LOCAL.
• MAINTENANCE MENU will be displayed.
Press
2
EXGHANGE", and press the
• Waste ink tank information is displayed.
Press
3
press the
Press the
4
• The waste ink tank amount that is managed in this
machine will be reset.
Pull the waste ink tank stopper to open to
5
the front.
Waste ink tank
stopper
Pull it frontward to remove by holding the
6
waste ink tank handle.
• Put a cap on the waste
ink tank removed.
4-18
(MENU)
to select "INK TANK
key.
to adjust the level, and
key.
key.
Waste ink
tank
Cap
Replace the waste ink tank.
7
(1) Prepare a new waste ink tank (SPC-0117).
(2) Insert the waste ink tank by holding a handle
of the tank.
New waste ink
tank
• Waste ink is equivalent to waste oil of industrial
waste. Request an industrial waste disposal
company for disposal of waste ink.
Close the waste ink tank stopper.
8
Press the
9
• The ink discharging amount that is controlled by
the machine is reset and the message is
cancelled.
key.