Setting of Logical Seek
The head's operation varies depending on the LOGICAL
SEEK settings, as shown in the figure below.
Movement of heads when LOGICAL seek is OFF
UNI-DIRECTIONAL
Media
Print erea
Red arrow :
Movement of head
Movement of heads when LOGICAL seek is ON
UNI-DIRECTIONAL
Media
Print erea
Red arrow :
Movement of head
Press the
1
LOCAL.
Press
2
and press the
• SETUP MENU will be displayed.
Press
3
SEEK", and press the
Press
4
press the
• Set value : HOST / ON / OFF
Press the
5
to end the setting.
BI-DIRECTIONAL
Media
BI-DIRECTIONAL
Media
(MENU)
key in
to select SETUP 1 to 4,
key.
to select "LOGICAL
key.
to select a set value, and
key.
key several times
Setting of Drying Time
In the drying time setting, the following items for ink drying
time are set.
• SCAN
: Ink drying time for each scanning is set. (During
bidirectional printing, the machine stops for a
certain period of time specified for each of the
outward and return scanning.)
• PRINT END : Ink drying time after printing has been complete
is set.
• When you give priority to the setting at the
RasterLink side, make the setting value "Host".
• "SCAN" set in this machine is displayed as "Pause
Time per Scan" in the RasterLink.
• You cannot specify the print end at the RasterLink
side. When you set this machine to "Host", printing
will be performed in "PRINT END= 0 min." status.
Press the
1
LOCAL.
Press
2
and press the
• SETUP MENU will be displayed.
Press
3
and press the
Press the
4
Press
5
time, and press the
• Set the drying time for canning and after printing
is completed. To enable the drying time specified
in your RIP, select "Host".
• Scanning setting value :
Host or 0.0 sec. to 9.9 sec.
• Print end setting value:
Host or 0 sec. to 120 min.
• Item selecting : by the [][] keys
• Time setting
: by the [][] keys
Press the
6
to end the setting.
Chapter 3 Setup
key in
(MENU)
to select SETUP 1 to 4,
key.
to select "DRYING TIME",
key.
key.
to set drying
key.
key several times
1
2
3
4
5
6
3-7