MIMAKI TS300P-1800 Operation Manual page 63

Function name
Mail Delivery
( P.3-20)
Select Event
( P.3-21)
Mail Address
( P.3-21)
Message Subject
( P.3-21)
EVENT MAIL
Server Setup
( P.3-22)
Transmit Test
( P.3-23)
RESET( P.3-24)
*1. Settable when both of DHCP and AutoIP are [OFF]
*2. Settable only when Auth. is not OFF
*3. Settable only when Auth. is POP before SMTP
Set value
ON / OFF
Print Start
ON / OFF
Event
Print End Event ON / OFF
Error Event ON / OFF
Warning Event ON / OFF
Other Event ON / OFF
Set the e-mail address to which
you send the event mail.
Set the characters to write in the
subject of the event mail.
SMTP Address
SMTP Port No.
SENDER ADDRESS
POP before
SMTP
Authentication SMTP
Authentication
OFF
*2
User Name
Pass Word *2
*3
POP3 Address
APOP *3
Send the test e-mail.
Chapter 3 Mchine setting
Default Meaning
Set whether you send/ do not send the e-mail
OFF
when the set event occurs.
Set whether you send/ do not send the e-mail at
OFF
the start of printing.
Set whether you send/ do not send the e-mail at
OFF
the end of printing.
Set whether you send/ do not send the e-mail
OFF
when a error occurs.
Set whether you send/ do not send the e-mail
OFF
when a warning occurs.
Set whether you send/ do not send the e-mail
OFF
when an event other than the above occurs.
Alphanumeric characters and symbols (within 96
characters)
Alphanumeric characters and symbols (within 8 characters)
Set the SMTP server.
Set the SMTP port number.
Set the e-mail address to be used as the sender mail
address.
Set the SMTP server authentication method (SMTP
authentication).
Set the user name used for the authentication.
Set the password used for the authentication.
Set the POP server.
Set ON/ OFF of APOP.
All setting values are returned to the status
default.
1
2
3
4
5
6
3-15