Suspend The Nozzle Cleaning; Fill Up Ink; Replacing Consumables; Replacing The Wiper - MIMAKI TS300P-1800 Operation Manual

Chapter 4 Maintenance

Suspend the nozzle cleaning

When you want to work as such a printing during the
nozzle cleaning, you can interrupt the nozzle cleaning.
• If the nozzle cleaning is interrupted, run the head
cleaning without waiting for the configured
cleaning time.
Press the
1
nozzle cleaning implement.
• Display the selection screen of the nozzle
cleaning stop.
NOZZLE WASH
CONTINUE<
Press to select "CANCEL".
2
• If you want to continue the nozzle cleaning, please
select [](CONTINUE).
4-16
key during the
CANCEL?
>CANCEL

Fill up Ink

Supplies ink to correct nozzle clogging.
Press
(MENU)
1
in LOCAL.
• MAINTENANCE MENU will be displayed.
Press to select "FILL UP INK",
2
and press the
Press to select the filling head,
3
and press the
Press the
4
• Ink is supplied automatically.
Press the
5
end the setting.

Replacing consumables

Replacing the wiper

The wiper is consumable. When the display indicates the
warning message "Replace a WIPER" it is necessary to
check and replace the wiper, immediately replace the
wiper with a new one.
Also, wipe ink sticking to the lower surface of the slider off.
• When the warning message for replacing wiper is
shown, confirm whether there is no damage and
fuzz at the top edge of the wiper film. If there is no
damage on the top edge of the wiper film, it is
possible to use the wiper continuously without
replacing it.
• A cleaning wiper is an option.Buy one through the
dealer in your region or at our service office.
Press
(MENU)
1
in LOCAL.
• MAINTENANCE MENU will be displayed.
Press the
2
• "STATION" will be selected.
Press to select "WIPER
3
EXCHANGE", and press the
key.
key.
key.
key several times to
key.
key.