Setting The Display Of Media Residual; Setting The Pg Drop Adjust; Setting The Media Detection - MIMAKI TS300P-1800 Operation Manual

Setting the Display of Media Residual

Whether the screen displays the remaining amount of a
media is set.
the remaining amount of a media
is displayed in Remote.
When the media remaining
(However, when a leaf media is
amount display is turned
used, the length of the media to
to "ON"
be printed is displayed.)
When the media remaining
the remaining amount of a media
amount display is turned
is not displayed in the Remote.
to "OFF"
• The amount of a media that has been fed by the
printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the
remaining amount) is entered when a roll media is
detected.( P.2-9)
• The setting configured here does not become
effective unless media detection is performed after
the setting has been complete.
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press to select "MEDIA
2
REMAIN", and press the
Press to select ON/OFF.
3
Press the
4
Press the
5
end the setting.
• When set "ON" the media remaining display, you
can print the list of current media remaining
amount and the date. (

Setting the PG Drop Adjust

Adjust the outward and return ink drop positions during
bidirectional printing.
PG Drop Adjust adjusts the ink drop positions at two
points where the head height is not the same, so that high
quality printing can be realized by automatically adjusting
the ink drop positions even if the head height changes.
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "PG DROP
3
ADJUST", and press the
Loosen the carriage height adjustment
4
screw and press the
(twice)
key.
key.
key several times to
P.2-9)
(twice)
key.
key.
Chapter 3 Mchine setting
• Loosen the screen by referring to P.2-4 "Adjusting
the Head Height".
With the head height set as 3 mm, tighten
5
the height adjustment screw.
Press the
6
• Ink drop position adjustment patterns 1 to 5 will be
printed.
Correct the dot positions in patterns 1 to 5
7
by referring to P.3-6 "If the Positions of
Dots Shift...".
By referring to steps 4 to 7, change the
8
head height to 4 mm and then correct the
dot positions in patterns 1 to 5.
Press the
9
end the setting.

Setting the Media Detection

Set the following two items in media detection settings.
When seting the media, set whether to
detect the media width automatically
Setting of Media
(AUTO) or decide the print (or cut)
Detection
range manually (MANUAL).
Set whether to enter the thickness of
Setting of Media
the media during media detection.
Thickness
• When using the media that cannot be detected by
the sensor, set the media detection setting to
"MANUAL".
Press
(MENU)
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press (>>) .
2
Press to select "MEDIA
3
DETECT", and press the
Press the
4
• "DETECTION TYPE" will be selected.
Press to select "AUTO/
5
MANUAL", and press the
Press to select "INPUT
6
THICKNESS", and press
Press to select ON/OFF, and
7
press the
Press the
8
end the setting.
• To improve image quality for printing, we
recommend selecting "ON" in step 7.
key twice.
key several times to
(twice)
key.
key.
key.
.
key.
key several times to
3-17
1
2
3
4
5
6