MIMAKI TS300P-1800 Operation Manual page 70

Chapter 3 Mchine setting
Set the server
Press
1
in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
Press
3
and press the
Press 4 times, and press the
4
key.
• "SERVER SETUP" will be selected.
Press the
5
• "SMTP ADDRESS" will be selected.
Press
6
Address, and press the
• Press jog key [][][][] to set SMTP address.
• Input the SMTP address name.
Press , and press the
7
• "SMTP PORT No." will be selected.
Press
8
press the
• Set the SMTP port number.
Press , and press the
9
• "SENDER ADDRESS" will be selected.
Press
10
ADDRESS, and press the
• Press [][][][] and set the e-mail address to
be used as the sender mail address.
• Set it with alphanumeric characters and symbols
within 64 characters.
• Depending on your server, if you do not
set the e-mail address not supporting the
account, sending/ receiving e-mails may
be unavailable.
Press , and press the
11
• "AUTHENTICATION" will be selected.
Press
12
method, and press the
• Set the authentication method of the SMTP
server.
• When you select [OFF], proceed to the Step 20.
Press , and press the
13
• "USER NAME" will be selected.
Press
14
Name, and press the
• Press [][][][] to set the user name to use
for the authentication.
• Set it with alphanumeric characters and symbols
within 30 characters.
3-22
(MENU) (twice)
(<<) .
to select "EVENT MAIL",
key.
key.
to set SMTP
key.
key.
to set SMTP Port No., and
key.
key.
to set SENDER
key.
key.
to set authentication
key.
key.
to set User
key.
Press , and press the
15
• "PASSWORD" will be selected.
Press
16
Word, and press the
• Press [][][][] to set the password to use for
the authentication.
• Set it with alphanumeric characters and symbols
within 15 characters.
• On the password setting screen, you can
only check the value that you are currently
inputting.
• When you select [POP before SMTP] in the Step
11, set the items in the Step 16 to 19.
Press , and press the
17
• "POP3 ADDRESS" will be selected.
Press
18
Address, and press the
• Press [][][][] to set POP server.
• Input the POP server name.
Press , and press the
19
• "APOP" will be selected.
Press to set ON/ OFF, and press
20
the key.
Press the
21
end the setting.
key.
to set Pass
key.
key.
to set POP3
key.
key.
key several times to