About Maintenance Menu - MIMAKI TS300P-1800 Operation Manual

Chapter 4 Maintenance

About MAINTENANCE MENU

This provides various settings for doing maintenance on the machine.
The following items can be set in Maintenance settings.
Local <Setup 1>
heigth: 4.0mm
width:1340mm width:1340mm
POST1 POST2
30° /40° 30° /40°30° /50° HIGH
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
 MAINTENANCE MENUs at-a-glance
Local <Setup 1> 12:00
heigth: 4.0mm
width:1340mm width:1340mm
POST1 POST2 FAN
30° /40° 30° /40°30° /50° HIGH
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
MAINTENANCE
>
STATION
NOZZLE RECOVERY >
AUTO MAINTENANCE >
INK FILLING >
INK TANK EXCHANGE
 Screen transition when
Local <Setup 1> 12:00
heigth: 4.0mm
< page page >
width:1340mm width:1340mm
POST1 POST2 FAN
30° /40°30° /50° HIGH 30° /40°
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
4-4
12:00
FAN
MENU
SETUP >
MAINTENANCE >
MACHINE SETUP >
NOZZLE CHECK >
INFORMATION >
MAINTENANCE
>
STATION
NOZZLE RECOVERY >
AUTO MAINTENANCE >
INK FILLING >
INK TANK EXCHANGE
is pressed
MAINTENANCE
TEST PRINT >
CLEANING >
STATION MAINTENANCE >
: Press this to select MAINTENANCE MENU, or to switch to
the previous screen.
: Press this to use the maintenance function.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
MAINTENANCE
STATION >
NOZZLE RECOVERY >
AUTO MAINTENANCE >
INK FILLING >
INK TANK EXCHANGE >
MAINTENANCE MAINTENANCE
>
STATION STATION
NOZZLE RECOVERY > NOZZLE RECOVERY
AUTO MAINTENANCE > AUTO MAINTENANCE
INK FILLING > INK FILLING
INK TANK EXCHANGE INK TANK EXCHANGE
MAINTENANCE MAINTENANCE
TEST PRINT > TEST PRINT
CLEANING > CLEANING
STATION MAINTENANCE > STATION MAINTENANCE
MAINTENANCE
> >
STATION
> NOZZLE RECOVERY >
> AUTO MAINTENANCE >
> INK FILLING >
INK TANK EXCHANGE
>
>
>