Setting Pre-Feed - MIMAKI TS300P-1800 Operation Manual

Chapter 3 Setup

Setting Pre-feed

The following effects can be expected by feeding back
and forth the media before printing.
• Prevent media from sticking to the various rollers and the
platen of this machine.
• If the wrinkle is shifted to the media, wrinkle reduction can be
expected.
Press
1
Press
2
and press the
• SETUP MENU will be displayed.
Press
3
Press
4
press the
Press
5
lengths.
• Set Value : OFF, 100 to 500mm
• When [OFF] is set, pre-feed is not executed.
Press the
6
Press the
7
end the setting.
3-12
(MENU) in LOCAL.
to select SETUP 1 to 4,
key.
(>>) twice.
to select "Pre-Feed", and
key.
to set the feeding media
key.
key several times to