About Nozzle Check Menu; Information Menu Table - MIMAKI TS300P-1800 Operation Manual

About NOZZLE CHECK MENU

Set operations concerning the nozzle missing detection function.
Local <Setup 1> 12:00
heigth: 4.0mm
width:1340mm width:1340mm
POST1 POST2 FAN
30° /40° 30° /40°30° /50° HIGH
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
 NOZZLE CHECK MENUs at-a-glance
Local <Setup 1> 12:00
heigth: 4.0mm
width:1340mm width:1340mm
POST1 POST2 FAN
30° /40°30° /50° HIGH 30° /40°
three
TEST PRINT TEST PRINT
MENU MENU REMOTE REMOTE
CLEANING CLEANING
times
NOZZLE CHECK NOZZLE CHECK
Printing Check > Printing Check
NOZZLE RECOVERY > NOZZLE RECOVERY
Judgement Condition > Judgement Condition

INFORMATION MENU table

Function name
Printing Check ( P.3-26)
(ON) LENGTH
Check
Interval
FILE
CLEANING
Action
RETRY
COUNT
NOZZLE RECOVERY
( P.3-27)
Judgement Condition
( P.3-27)
*1. When the set length is reached during printing, nozzle check is conducted at the start of the next printing.
*2. Depending on the print conditions, nozzle recovery is not applied in some cases.
MENU NOZZLE CHECK
SETUP > Printing Check
MAINTENANCE > NOZZLE RECOVERY
MACHINE SETUP > Judgement Condition
NOZZLE CHECK >
INFORMATION >
NOZZLE CHECK
> Printing Check
> NOZZLE RECOVERY
> Judgement Condition
Set value Default
ON/OFF OFF
0.1 to 50.0m 30.0 m
1 to 100 30 file
OFF/ SOFT/
SOFT
NORMAL/ HARD
0 to 3 1
ON/OFF OFF
1 to 200 1
Chapter 3 Confirming Machine Information
: Press this to select INFORMATION MENU, or to switch to
the previous screen.
: Press this to switch to the next screen.
: Use these to select a setting item.
: Press this to confirm a setting, etc..
>
>
>
>
>
>
Meaning
Set this when you want to conduct nozzle check at the
beginning of online printing.
Conducts nozzle check at each set length.
Conducts nozzle check at each set number of files.
Sets the type of cleaning performed during recovery work.
Repeats the retry operation for the set number of times.
Set this when you want to conduct automatic nozzle recovery.
Sets how many missing nozzles are detected for "Nozzle
Missing" judgment to be made according to each color.
(Maximum 16 per 1 nozzle line)
*1
*2
3-25
1
2
3
4
5
6