Chapter 1 Before Use; Moving This Machine; Where To Install This Machine; Working Environmental Temperature - MIMAKI TS55-1800 Operation Manual

Chapter 1 Before Use

Moving This Machine

Where to Install This Machine

Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Model Width
3240mm
TS55-1800
(127.6 in)
500 mm or more
(19.7 in or more)

Working Environmental Temperature

Use this machine in an environment of 20 to 30C (68 to
86F) to ensure reliable printing.
1-2
Gross
Depth Height
weight
713mm 1,857 mm 202 kg
(28.1 in) (73.1 in) (445.3 lb)
500 mm or more
(19.7 in or more)

Moving This Machine

Move this machine according to the following steps when
this machine needs to be moved on the same step-free
floor.
• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur. Be sure to request your distributor or our
service office to move this machine.
• When moving this machine, take care that it does
not receive a significant impact.
• Be sure to lock the casters after moving of this
machine.
1
Remove the caster block of the rear leg.
2
Raise the adjuster foot of the front leg with
the attached adjustable angle wrench.
3
Raise the take-up legs.