Chapter 1 Before Use
Moving This Machine
Where to Install This Machine
Secure a suitable installation space before assembling
this machine.
The place of installation must have enough space for not
only this machine itself, but also for the printing operation.
Model
Width
JV300-130 A
2525mm
JV300-130 A Plus
(99.4in)
JV300-160 A
2775mm
JV300-160 A Plus
(109.3in)
500 mm or more
(19.7 in or more)
Working Environmental Temperature
Use this machine in an environment of 20 to 30°C to
ensure reliable printing.
1-2
Gross
Depth
Height
weight
700mm
1392mm
170kg
(27.6in)
(54.8in)
(374.8lb)
700mm
1392mm
200kg
(27.6in)
(54.8in)
(440.9lb)
500 mm or more
(19.7 in or more)
Moving This Machine
Move this machine according to the following steps when
this machine needs to be moved on the same step-free
floor.
• When the machine is moved to any place other
than on the same step-free floor, contact your
distributor or our service office.
If you move it by yourself, failure or damage may
occur. Be sure to request your distributor or our
service office to move this machine.
• When moving this machine, take care that it does
not receive a significant impact.
• Be sure to lock the casters after moving of this
machine.
Release the lock of caster.
1
Move this machine as shown in the figure.
2
• For safety, be sure to operate it with 4 people or
more.
• Do not push the cover to move this machine since
the cover may be broken.
Lock the caster.
3