Table of Contents
Advertisement
3. Connect additional Category 6A (or better) cables from your network switch or
hub to the remaining 10-GbE ports on other EMS modules, as needed for your
server configuration.
4. Secure the network cables to the server.
See
"Managing Data Cables" on page
Related Information
"PDomain Cables and Network Addresses" on page 65
■
"Maximum Cable Connections" on page 121
■
"Managing Data Cables" on page 136
■
▼ Connect Other Data Cables
1. If your server configuration includes optional PCIe cards, connect the
appropriate I/O cables to their connectors.
Refer to the PCIe card documentation for specific instructions.
Note – For instructions on installing optional PCIe cards using the PCIe hot-plug
carrier, refer to the Server Service, servicing I/O cards.
136.
Connecting the Rear Power Cords and Data Cables
135
Advertisement
Table of Contents
