Table of Contents
Advertisement
Stabilizing the Server
These topics describe how to stabilize the server using the leveling feet and
(optionally) using mounting brackets.
Task
Lower the leveling feet to stabilize the
server at the installation site. Raise the
leveling feet before moving the server to
another site.
Optionally bolt the server to the floor
using mounting brackets.
▼ Lower the Leveling Feet
Use leveling feet at the four corners of the server to stabilize the server to the floor.
1. Open the server doors.
2. Use a 19-mm wrench to loosen the 19-mm locking nuts located at the top of each
leveling foot.
Turn the wrench clockwise to loosen the 19-mm locking nuts. When tightened,
these locking nuts prevent the leveling feet from being raised or lowered, so
loosen these nuts before lowering the leveling feet.
Link
"Lower the Leveling Feet" on page 87
"Raise the Leveling Feet" on page 89
"Install the Mounting Brackets" on page 91
Installing the Server
87
Advertisement
Table of Contents
