Connect Other Data Cables - Oracle SPARC T7-2 Installation Manual

1. Connect a Category 5 (or better) cable from your network switch or hub to
Ethernet Port 0 (NET0) on the rear of the chassis.
Connect Category 5 (or better) cables from your network switch or hub to the
2.
remaining Ethernet ports (NET1, NET2, NET3), as needed.
Related Information
Server Administration
■
"Powering On the Server for the First Time" on page 53
■

Connect Other Data Cables

If your server configuration includes optional PCIe cards, connect the
appropriate I/O cables to their connectors.
Refer to the PCIe card documentation for specific instructions.
Related Information
Documentation for the PCIe card
■
Server Service
■
Connect Other Data Cables
Connecting the Server Cables 51