Table of Contents
Advertisement
Connect Other Data Cables
1.
Connect a Category 5 (or better) cable from your network switch or hub to
Ethernet Port 0 (NET0) on the rear of the chassis.
Connect Category 5 (or better) cables from your network switch or hub to the
2.
remaining Ethernet ports (NET1, NET2, NET3) as needed.
Related Information
Servers Administration
■
"Powering On the Server for the First Time"
■
Connect Other Data Cables
If the server is configured with additional I/O components, connect the external
cables to the connectors contained on those components.
Related Information
PCIe card documentation
■
Server Service
■
Secure Cables Using the CMA
Use the CMA to secure cables and ensure proper cable routing.
1.
Remove the CMA cover.
64
SPARC T5-4 Server Installation Guide • July 2015
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T5-4 and is the answer not in the manual?
Questions and answers