Table of Contents
Advertisement
Connect Other Data Cables
2.
Connect Category 5 (or better) cables from your network switch or hub to the
remaining Ethernet ports (NET 1, NET 2, NET 3), as needed.
Related Information
"Configuring SP and Host Network Addresses" in SPARC T7 Series Servers Administration
■
Guide
"Powering On the Server for the First Time" on page 65
■
Connect Other Data Cables
If your server configuration includes optional PCIe cards, connect the
appropriate I/O cables to their connectors.
Refer to the PCIe card documentation for specific instructions.
Related Information
PCIe card documentation
■
SPARC T7-1 Server Service Manual
■
Secure Cables to the CMA
After connecting the server cables, secure them to the CMA if a CMA was installed.
1.
Attach the CMA to the server in the rack.
See
"Prepare the CMA for Installation" on page 38
Server" on page
62
SPARC T7-1 Server Installation Guide • October 2015
41.
and
"Attach the CMA to the
Advertisement
Table of Contents
Need help?
Do you have a question about the SPARC T7-1 and is the answer not in the manual?
Questions and answers