Table of Contents
Advertisement
5. (Optional) Use tie wraps and adhesive cable-tie mounts to secure the SP cables
to the inside edges of the left and right trim panels.
By securing the SP cables to the trim panels, the cables will not interfere with the
front fan modules.
6. In the crawl space under the server, secure the SP cables to your facility cable
management devices.
Request instructions from your facility manager.
7. Continue with the illustration by installing the front door.
See
Related Information
"Connect the SP Cables" on page 97
■
"Route the SP Cables Up" on page 107
■
"Managing Data Cables" on page 136
■
106
SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
"Install the Door" on page
115.
Advertisement
Table of Contents
