Oracle sparc M5-32 Installation Manual page 108

3. Connect Category 6 (or better) cables from the SP0 and SP1 NET MGT RJ-45
ports to separate network switches of hubs.
To achieve 1-GbE network speeds, use Category 6 (or better) cables and network
devices that support 1000BASE-T networks. These 10/100/1000 Mbps NET MGT
ports will autonegotiate to the speed of your network.
4. Continue with the installation.
To secure the SP cables through the front panels, see
page
Related Information
"Front Components" on page 6
■
"SPs and SPPs" on page 10
■
"Oracle ILOM" on page 15
■
"SP Cables" on page 60
■
"SP Network Addresses" on page 64
■
"Securing the SP Cables" on page 99
■
98 SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
99.
"Securing the SP Cables" on