Oracle sparc M5-32 Installation Manual page 161

3. Set the netmask IP address for all SP addresses.
-> set /SP/network pendingipnetmask=255.255.255.0
Set "pendingipnetmask" to "255.255.255.0"
This example uses 255.255.255.0 to set the netmask. Your network
environment subnet might require a different netmask. Use a netmask number
most appropriate to your environment.
4. Assign the required IP addresses for the SP components.
Active SP:
■
-> set /SP/network/ACTIVE_SP/ pendingipaddress=xxx.xxx.xxx.xxx
Set "pendingipaddress" to "xxx.xxx.xxx.xxx "
SP0:
■
-> set /SP/network/SP0/ pendingipaddress=xxx.xxx.xxx.xxx
Set "pendingipaddress" to "xxx.xxx.xxx.xxx"
SP1:
■
-> set /SP/network/SP1/ pendingipaddress=xxx.xxx.xxx.xxx
Set "pendingipaddress" to "xxx.xxx.xxx.xxx "
HOST0 (PDomain0-SPP):
■
-> set /SP/network/HOST0/ pendingipaddress=xxx.xxx.xxx.xxx
Set "pendingipaddress" to "xxx.xxx.xxx.xxx "
Powering On the Server for the First Time 151