5. Use a T20 Torx screwdriver to remove the three M4X10 screws securing the left
cable bracket.
Remove and save the bracket and screws for the next steps.
6. Position the left cable bracket so that it faces downward in the left cable
channel.
7. Use a T20 Torx screwdriver to secure the left cable bracket to the left cable
channel with three M4X10 screws.
8. Continue with the installation by connecting the power cords.
See
"Connect the Power Cords" on page
Related Information
"Rear Cable Routing Options" on page 119
■
"Maximum Cable Connections" on page 121
■
"Cable Management Devices" on page 122
■
"Secure the Power Cords" on page 131
■
"Managing Data Cables" on page 136
■
126.
Connecting the Rear Power Cords and Data Cables
125