Table of Contents
Advertisement
8. Route the SP cables out the top of the server, and secure the cables to a cable
tray or a cable management device above the server.
9. (Optional) Use tie wraps and adhesive cable-tie mounts to secure the SP cables
to the inside edges of the left and right trim panels.
By securing the SP cables to the trim panels, the cables will not interfere with the
front fan modules.
10. Continue with the installation by installing the front door.
See
Related Information
"Connect the SP Cables" on page 97
■
"Route the SP Cables Down" on page 102
■
"Securing the SP Cables" on page 99
■
114
SPARC M5-32 and SPARC M6-32 Servers Installation Guide • December 2014
"Install the Door" on page
115.
Advertisement
Table of Contents
